BAC Forum
General Boards => General Discussion => Topic started by: Ted Stouch on January 03, 2021, 10:23:13 PM
-
When we park we usually put a board under the front jack, especially if we are in gravel, to provide support. The problem I have is getting the board lined up properly with the front jack. Is there an easier way to do this?
-
I use a short piece of 6X6 with a strap on it. I can then take the awning pull/hook and position the block where it is needed. I can lower the jack just enough to center the 6x6 then level. Hope this helps.
-
Similar solution done for my previous Beaver, but it doesn’t store as well as a strap... I used a small eyebolt in a two-ply treated 8”x8” square cut from a 2x8 screwed together with several 2 1/2” deck screws, each ply 90 degrees to the other. I felt as though the eyebolt allowed for more maneuverability than engaging a strap with the rod. Made a set of 3 from one treated 2x8 bought at a home center.