BAC Forum

General Boards => Technical Support => Topic started by: Kimberly Bryan on October 26, 2019, 07:07:15 PM

Title: How to read inverter remote
Post by: Kimberly Bryan on October 26, 2019, 07:07:15 PM

Our new to us beaver has a trace/xantrex inverter charger
The only thing we know for sure is that it is receiving 120 AC in while plugged in, however we cant figure out the AGS settings, or when it is charging or inverting, 2000 watt prosine
It has trace engineering on remote and manual, but also xantrex.
Can anyone explain how to make operate remote.
Also we cannot tell the battery state.

Title: Re: How to read inverter remote
Post by: Bill Lampkin on October 26, 2019, 09:38:55 PM

Here is the manual:


http://www.xantrex.com/documents/Inverter-Chargers/PROsine-2/PROsine_2.0_User's_Manual(445-0089-01-01_rev-C).pdf