BAC Forum

General Boards => Technical Support => Topic started by: George Harwell on February 21, 2016, 03:57:03 PM

Title: Moto Sat skew motor
Post by: George Harwell on February 21, 2016, 03:57:03 PM

My moto Sat HD-SL5 skew motor has died but I want to keep the system. Hopefully I can find the top half that contains the dish mount, lnb's with arms etc. I need everything above the rotating base except the dish itself. With some luck I can be back in commission in less than an hour. Looking for ideas from fellow Beavers.

Title: Re: Moto Sat skew motor
Post by: Gerald Farris on February 22, 2016, 04:22:26 AM

George,
Don Marr in Eugene, Oregon (http://www.motosatparts.com/) has an extensive supply of used/new MotoSAT parts. He can probably help you out.

Gerald

Title: Re: Moto Sat skew motor
Post by: George Harwell on February 22, 2016, 09:29:59 PM

Thanks Gerald. Will give him a call.

Title: Re: Moto Sat skew motor
Post by: Bill Laatz on February 29, 2016, 03:11:19 AM

I removed my motosat from my 2006 Marquis and replaced it with a weingard hd dish.  My old unit is sitting in my garage in Michigan, and I am willing to sell the complete unit at a reasonable cost.  I am in Florida, but could probably arrange shipping.

Title: Re: Moto Sat skew motor
Post by: George Harwell on February 29, 2016, 01:28:18 PM

Thanks Bill. Will try to get with you today.

Title: Re: Moto Sat skew motor
Post by: Bill Laatz on February 29, 2016, 06:31:21 PM

Sorry, must of had a senior moment, the dish that I removed is not a Moto-Sat, but most likely a King Dome in motion which is a black dome about 3' diameter and about 10" high that was mounted on the roof.  It may have been original or added by the first owner.

Title: Re: Moto Sat skew motor
Post by: Mark Bryant on March 01, 2016, 02:25:12 AM

I have have Moto-Sta mount with skew motors that I replace last summer. Can remove motors if you need them.

Title: Re: Moto Sat skew motor
Post by: George Harwell on March 03, 2016, 09:50:32 PM

Thanks Mark, will be calling soon.