BAC Forum

General Boards => Technical Support => Topic started by: John Bagwell on July 27, 2015, 10:49:13 PM

Title: Genset Hour Counter in Info Center
Post by: John Bagwell on July 27, 2015, 10:49:13 PM

My genset hour counter has stopped moving and is stuck, and will not record now when generator is running.  Any ideas on getting it unstuck.

Thanks for the help.

John

Title: Re: Genset Hour Counter in Info Center
Post by: Fred Brooks on July 28, 2015, 12:18:05 AM

           John, I have some spares, send me the dimensions and I'll see if I have one.

                     Regards, Fred

Title: Re: Genset Hour Counter in Info Center
Post by: John Bagwell on July 28, 2015, 01:57:10 AM

I will measure tomorrow, and let you know. 
 
Thanks,  John

Title: Re: Genset Hour Counter in Info Center
Post by: Fred Brooks on July 28, 2015, 02:38:07 AM

      Hi John,
  Does it look like this?  Face is 2" wide x  1 1/4' tall x 2" deep with 2 male spade connectors.

               Regards Fred