BAC Forum

General Boards => Redecorating and Updating your Motorhome => Topic started by: Kent Walton on February 18, 2020, 05:32:23 PM

Title: televator TV lift installer
Post by: Kent Walton on February 18, 2020, 05:32:23 PM
I have a 2008 Beaver Contessa. I want to have a televator TV lift installed behind the curb side couch. I would love to hear from
members who have done this with thoughts to the following------- 1. what is the best way to get power behind the couch?----
2.is there a way to get a Directv signal from the DVR receiver to the new TV WITHOUT having to run coax cable to the new TV?-------3. I am located in the Palm Springs area. Are there any recommended service companies that could make the required changes and install the televator and TV ( at least in the Western states).
Thanks
Kent Walton
Title: Re: televator TV lift installer
Post by: Fred Brooks on February 18, 2020, 06:28:08 PM
   Hi Kent, I'll send you the information on the tv lift. I thought you told me you were going to inquire from directv guy if the remote reciever in the slide needed to be wired?. Fred
Title: Re: televator TV lift installer
Post by: Lee Welbanks on February 19, 2020, 03:07:07 AM
Kent, I believe there are ways to send signal to a Tv without wires. They have HDMI Extenders that will do the trick, I can cast movies from my laptop to our smart TV across the house. I don't know if Direct or Dish has a wireless DVR yet but you can bet it's coming.. There probably other way to get this done out there in the tech world.
Title: Re: televator TV lift installer
Post by: Larry Fisk on February 23, 2020, 04:17:20 PM
We have the wireless Direct TV setup in our coach. DVR is connected to the front TV and wireless receiver in the Bedroom. Innovative Coachworks did our install and they are currently here in the Palm Springs area. They are not cheap but they do great work and are very experienced with RV Installs. The owner is Matt Rossiter and their number is ((541) 505-2257.