BAC Forum

General Boards => Technical Support => Topic started by: Roy Lewis on April 24, 2017, 03:46:32 PM

Title: Lug nut cover
Post by: Roy Lewis on April 24, 2017, 03:46:32 PM

Hi folks we have a 02 Marquis Tourmaline. I have a missing lug nut cover, does anyone know what size they are?

Title: Re: Lug nut cover
Post by: Lee Welbanks on April 25, 2017, 12:06:55 AM

Go to any good truck stop and in the store you will find all the chrome you need. Might be hard to find just one or two most come in sets.

Title: Re: Lug nut cover
Post by: Steve Huber Co-Admin on April 25, 2017, 01:05:56 AM

Roy,
I think they are 33 mm. You can remove one easily using channel locks and a rag to protect the finish.
Steve

Title: Re: Lug nut cover
Post by: darell ottoson on April 25, 2017, 01:09:53 AM

I checked all the truck stops in my area for the same thing plus some other parts for my wheel simulators. I found mine were made by Dicor @ www.dicor.com.
However I had better help and was able to get my parts at WWW.summitracing.com. For mine they are 10 stud, 2 hand holed, 22.5 inch wheels. Summit part number PHO-PN6256LNC for the lug nut covers. I think these parts are made by Phoenix. I was able to get left and right jam nuts and extenders there also. The covers were a little over $2 each. Theirs and the  phoenix usa websites are very helpful. Good luck Darell