BAC Forum

General Boards => Technical Support => Topic started by: Jerald Cate on January 22, 2015, 01:26:52 AM

Title: Side Console DC Rocker Switch
Post by: Jerald Cate on January 22, 2015, 01:26:52 AM

Does anyone know the manufacturer and series of the rectangular rocker switches on the side console and instrument panel?  I want to add a simple ON/OFF switch to one of the existing blank holes and cannot find one that will fit the cut-out.  My cut-outs are 0.9" x 1.75" and the largest switch I've found so far fits a 0.8" x 1.5" cut-out. 

Bruce

Title: Re: Side Console DC Rocker Switch
Post by: Bob Jae on January 22, 2015, 02:27:12 AM

I believe they are made by Carling.  I also have the following as a source for them:

PROTO-FAB
1615 EL RENO ST.
ELKHART, IN. 46516

(574) 522-4245

Title: Re: Side Console DC Rocker Switch
Post by: Keith Moffett on January 22, 2015, 12:17:21 PM

Bought a couple of these at Beaver Coach Sales, parts dept.
I always try there first because well where would we be without them and their support of our club?

Title: Re: Side Console DC Rocker Switch
Post by: Lee Welbanks on January 22, 2015, 01:33:12 PM

The switches are made by Carling, a couple of sources for these:

http://www.otrattw.net/Switch-w-Rocker/

http://www.carlingtech.com/rocker-switches-n-series

Title: Re: Side Console DC Rocker Switch
Post by: Fred Brooks on January 22, 2015, 02:28:00 PM

Carling switches were also used by American Coach, Country Coach, and Monaco if you are near a dealer that sells luxury coaches.
    Fred Brooks