BAC Forum
General Boards => Technical Support => Topic started by: Fred Nikirk on December 25, 2014, 01:06:43 AM
-
I have searched and can't find the article I read before on replacement cups on eBay for griard awning
Fred Nikirk
-
http://beaveramb.org/forum/index.php/topic,3806.msg29298.html#msg29298
This thread has a few links that might help...
-
Thank you it was very helpful
Fred Nikirk
-
Fred,
This is the one I used to replace my Girard Wind Sensor Cup assembly.
I had to drill the hole in the base just slightly larger, but once done it mounted properly and functioned as required.
http://www.rainmanweather.com/site/products/7342-178-Wind-Cups-Vantage-Vue-ISS