BAC Forum
General Boards => Technical Support => Topic started by: Bob Bulot on February 04, 2021, 11:44:48 PM
-
My coach has the dual electric window shades. One of the light accordion shades got tangled, so I removed it to untangle the strings. Once that was done I reinstalled the shade and reconnected the wires. Unfortunately, now when I push the multiplex buttons the electric motor only runs for about one second in either direction. What am I doing wrong?
-
Bob,
when my shades act up I turn off house disconnect switch momentarily, to reset multiplex. Also if you have another switch that controls that shade, try using that one to reset shade. Hope this helps.
-
Can anyone tell me if it is possible to reset the up and down stop limits of the shades?
-
Have you found any answers for resetting the stops? I have the same problem with the passenger roman shade. It keeps running for about 10 seconds after it is all the way up...
Thanks, don
-
Try google MCD shades setting the stops. Fred
-
MCD shades does supply good phone support
-
Jerry try this you tube link.
https://youtu.be/hMRsmyA91xI
Hope it helps
Eric