BAC Forum

General Boards => Redecorating and Updating your Motorhome => Topic started by: George Curry on August 12, 2011, 03:08:12 PM

Title: Tile in lounge of '06 Monterey
Post by: George Curry on August 12, 2011, 03:08:12 PM
Just starting rehab project, of replacing carpet with ceramic tile in lounge and operator compartment of coach.  Have researched it extensively. But, would welcome any points of what to avoid, so I can not have to build them into my learning curve!  Not sure what I should / want to do with the stair well.  Leave as is or replace linoleum / carpet with tile / wood veneer????

Thoughts?
George
Title: Re: Tile in lounge of '06 Monterey
Post by: Keith Oliver on August 12, 2011, 04:49:52 PM
Some PO did our steps with outdoor floor mat, the kind that has ridges and catches much of the stuff you don't want coming inside. At first I thought it wasn't classy enough to match the rest of the flooring, but now I like it a lot, as it helps reduce the labour of keeping the floor inside clean.  We also put down a portable mat below the outside step.  If you can always park where there is no dirt you won't need to do this.
Title: Re: Tile in lounge of '06 Monterey
Post by: Edward Buker on August 12, 2011, 05:35:55 PM
George,

A few years back, I toured several motorhome factories in Oregon. The one that was producing Beavers (at that time).  I stopped and spoke with a production individual about tile adhesive/grout systems and what they used, and he said that they had a lot of problems with cracking tile and grout. They had replaced the whole system with new adhesives and grout specifically designed for RV installations and other installation cases needing to flex without cracking.

You could call Monaco, and see if they would share the product names that they use now.  Beyond that you may talk with the application engineers of the tile grout and adhesive manufacturers.  I'm sure you want adhesives that flex and offer some movement  and the grouts will probably use more latex additive in the system than is needed in home installs.

Any underlayment fastener that works itself up in time under a tile, can crack a tile, so being sure those are recessed and secure. Hope this helps.

Later Ed
Title: Re: Tile in lounge of '06 Monterey
Post by: Jerry Carr on August 13, 2011, 12:06:53 AM
I was told the same thing about the old system used at Beaver, but Ken at Bend told me the new stuff was Greeeeat!  If Monaco is not able to help, give Ken a call at Bend.
Title: Re: Tile in lounge of '06 Monterey
Post by: Donald Lucke on August 28, 2011, 04:19:17 AM
We had Jim ? (the company in Bend that does aftermarket work---I don't recall his last name but someone will) tile the front and steps in our 03 Monterey.  That was about 6 years ago and it has held up just fine.  Materials were not special, just came from a local flooring store.  
Title: Re: Tile in lounge of '06 Monterey
Post by: Donald Lucke on August 28, 2011, 04:29:00 AM
The company to which I referred is RV Outfitters.
Title: Re: Tile in lounge of '06 Monterey
Post by: Gerald Farris on August 28, 2011, 03:59:53 PM
RV Outfitters is owned and operated by Jim Sizemore and he is partnered with Greg Fulton (the best Beaver cabinetmaker in the country)  of Greg Fulton Fine Woodworking who is located next-door to his shop in Bend. They are both former Beaver factory workers who know the coach very well, and as many club members can testify, their work is second to none.  

Gerald
Title: Re: Tile in lounge of '06 Monterey
Post by: LEAH DRAPER on August 28, 2011, 04:33:58 PM
AMEN TO THAT GERALD.