BAC Forum
General Boards => Technical Support => Topic started by: Laurence Mitchell on December 10, 2018, 11:52:41 PM
-
Season Greetings to all the BAC members!
Wanting to replace both front and back marker lights on my 2000 Beaver Marquis. Climbing up to inspect the lights, they are in such poor condition they have no numbers! Does anyone have a link or a part number so I can order these? I've searched the forums for the past few hours and couldn't find anything on a 2000 Beaver.
Thanks in advance for your help! Have a wonderful holiday!
Mitch
-
Wanting to stay with original (so I think) I replaced all ten with lights from Beaver Coach Sales in 2016.
Light, Clearance; Amber TL-18
Light, Clearance: Red TL-18
$9.95 each
-
Thank you so much for the info! I will ensure I seal these correctly after reading all the info on this.
Mitch
-
Laurance, Not sure if the 2000 and the 2004 Marquis are the same front and rear caps but we did change ours on our 2004 and used the KII LED clearance lights.
These led lights are sealed and so you only need to use the lexel to seal them to the front and rear cap to keep moisture out. They are slightly larger than the old clearance lights but fit well into the depressions in the caps. Are also much brighter and look a lot better as there is 18 leds in each light.
Part numbers are RED L14-0059R Amber L14-0059A
I just found them on PDXRVwholesale for $6.43 each plus shipping. I have 3 red that somehow I got extra and have no need for and would sell for $4.00 each plus post office shipping.
-
A regularly applied coat of Aeospace 303 will help somewhat extend the life of clearance light lenses, by mitigating UV deterioration, the resulting microcracking of which is a common body water leak source.
Joel
-
I replaced all my lights with LEDs. I took samples in to NAPA and they ordered replacements, it was no big deal. I replaced them spring 2017