BAC Forum
General Boards => Technical Support => Topic started by: Jim Shaw on April 19, 2015, 07:05:30 PM
-
I have a 2003 Monterey Coronado and need to replace my entry step. I know it is made by Kwikee but cannot find a model number on it. It is a single step.
Does anyone know the model number and the best place to order one.
Thanks,
Jim
-
Hi Jim,
If you can lay on your back and look up, the model # is on the mounting plate or the control module. If you replace the entire step assembly, don't forget to change the magnetic reed switch in the door jamb. The original switch was a "normally open" (white switch). The replacement is black "normally closed". If you don't change the reed switch, the step will respond opposite when you open and close the entry door.
Regards, Fred
http://support.powergearus.com/techdocs/82-ST0501.pdf