BAC Forum
General Boards => Technical Support => Topic started by: Bobby Kirk on April 15, 2015, 08:46:57 PM
-
I have a 2006 Beaver Marquis. I need to replace arm on drivers side. Anyone have a supplier??
Monacos price is not good. 270.00. Any help is appreciated.
Bobby Kirk
-
Bobby,
I was able to locate wiper arms and blades for my '09 Marquis at Diesel Equipment Company. They will need the "kit number off the wiper motor Monaco numbers begin with 0930 and have 4 numbers after. (0930XXXX)
Here is the contact info I have:
http://www.dieselequipment.com/shop/wiper/
Neenie Johnson
Customer Service
njohnson@dieselequipment.com
1-877-307-7059
Steven
-
Bobby:
The price Monaco provided you may have been for the wiper assembly. Last I called them for a wiper arm only, I was given a price of $80ish. That was priced within the last 6 months. I bought one from beaver coach sales and was disappointed with the fit. It appeared the female receiver for the shaft was not the exact diameter and therefore did not seat completely as it should have, but so far is holding up with very little use due to RainX.
This difference in diameter is why I called Monaco and to find out who manufactured theirs and at that time I believe the gentleman told me Diesel Engineering, but I can't be real certain. Beaver Coach sales provided me one manufactured by "MAO YI" which I claim is not quite at the same diameter but will fit. When I addressed this concern they commented they have put several on and have had no complaints.
Hope this helps, Good Luck
Larry D
-
Steven:
That was the name of supplier I was looking for in the event my replacement, made by MAO YI, takes a 180.
I'm real curious if it fit on the shaft as you would expect it to.
Larry D.
-
Larry,
Mine fit perfectly and only cost $16 each (wiper only not the arm) they were the exact replacements for what came on the coach. MAOYI was stamped on them.
Steven
-
I am still having a problem finding the right arm. The arm on my 2006 Marquis is made by Dana.
It is part #201566. I am striking out on every turn. I a waiting on a call from a truck co. that was given to me friom Neenie Johnson at Diesel Equipment. They do not handle Dana any longer.
Will Keep trying. Thanks for everyones help.
Bobby Kirk
-
You might contact AM in Jefferson, Oregon, Bobby. As I recall they supplied equipment for at least some of our coaches, and may be able to shed some light.
http://www.amequipment.com/windshield-wiper-systems-made-in-the-usa/
Joel
-
I finally found a replacement wiper arm for my 2006 Marquis. I thank everyone who had some input. I called diesel equipment and they told me they did not sell the Dana line. She gave me the ph for B&C Truck & Elec. 800-266-7636 (Chris) After doing some checking he found one and called me the next day, so it is on its way. Price was 134.00. Expensive but better than 270.00 from Monaco. Anyone that has a 2006 Marquis the Dana part number is 201566. It is 750mm Radial Wet Arm with a 38Degree bend. Thanks again.
Bobby Kirk