41
Technical Support / Re: Hydraulic pump leak
« Last post by Don Forsyth on April 23, 2024, 02:01:09 PM »Yes, that is correct. The nut at the housing. What in confusing me, is that the elbow that threads into the nut. So in order to change the O ring, I will have to disconnect the nut on the supply line from the elbow. Then remove the elbow to get to the nut to replace the O ring. Any idea of how much fluid will come out. Just so I have a big enough tub to catch it all. I tried to attach another picture of the supply line and elbow.