BAC Forum
General Boards => Technical Support => Topic started by: Keith Moffett on February 17, 2017, 04:48:19 AM
-
Some days dont you just scratch your head and wonder just what the designer must have been smoking?
Our PT has side hinge doors and several pass throughs. The joey beds go clear through both ways and work off a switch in the door in the passanger side. So .... if you want to get into the joey bed on the driver side you must open one door, go clear around and ope the other door, then go to the passanger side door to operate the switch. Thats right, one switch and two doors so back and forth alot. Closing up is the same in reverse.
So how dumb is that?
Anyone ever put a second switch in or do both have to be replaced with two two-way switches?
-
Engineers, especially automotive engineers, rarely have to do repairs on their designs. Thus, they don't learn the value of accessibility. That's the conclusion I have come to.
Put in a second control switch and let the systolic and diastolic return to normal.
-
Keith,
What kind of switch is used to control the piece? Does it power out and in as in a 3 way switch?
-
Lee
the rocker switch is three position. Out, In and stop. Is that simply a new three way switch with a cross wiring plan or do you know?
-
Lee
the rocker switch is three position. Out, In and stop. Is that simply a new three way switch with a cross wiring plan or do you know?
Not seeing the switch and this is a guess I would say it allows the motor to go forward and reverse. The switch is probably wired with the center hot so it will cause the motor to turn in either forward or reverse.
Where is the motor as I am not familiar with what you call a Joey. (Joey to me is a Dish Satellite item) It maybe as simple as adding a 3 way switch to the other side wired exactly like the first one.
-
Ours has a remote that you can operate from anywhere. It says Kwikee Power Slide on it.
Mike
-
Sorry if this is a dumb question but what is a joey bed? I've never heard this term before and have trouble picturing what you're discussing?
Thanks
-
Ed,
I'm with you but I think it is a powered tray for the basement compartment, I think????
-
A Joey bed is a tray in the basement that is used for storage and slides in and out, some manually and some electrically.
Keith, I think the 3 way switch you are talking about is one that will operate a motor or electrical fixture from two different positions. They have to be wired correctly and in the 120 volt world, both switches have to be 3 way switches. That doesn't mean 3 position switch which is " Forward, Off, Reverse". I am sure BCS or RV Outfitters can help you and most electricians. I know that if you don't know what you are doing, you are going to cause yourself problems and I can't help you, as I only know what they are and not how to install a 3 way, 3 position switch.
Roy Warren
-
For my power tray I have a remote like Mike has mentioned.
I don't know if it is a regular problem, but mine has acted odd a couple of times: When holding the retract button - tray going in - it usually stops and then goes in another couple of inches to its final/correct spot. However there has been a few times when it wants to keep going which then means it pushes on the diver's side door. One time it was wedged so tight (I couldn't open the driver's door) that I had to reach in and disconnect the slide from the track using the handle in order to move it back out.
Again, no rhyme or reason as most of the time it works great.
-
Keith,
I have a Newmar product with switches on both the curb and road sides so it can be done. Obviously, you'll need two limit/lockout switches so you don't try to push the bed through a closed door on the other side which I assume you already have but otherwise the system appears simple.
Tim Westman