BAC Forum

General Boards => Technical Support => Topic started by: Mitch Dashiell on November 22, 2018, 08:30:45 AM

Title: Valid air System
Post by: Mitch Dashiell on November 22, 2018, 08:30:45 AM

Does anyone have a diagram of the Valid air system for a 2007 Marquis?

Title: Re: Valid air System
Post by: Steve Huber Co-Admin on November 22, 2018, 02:58:30 PM

Mitch,
It is in the Coach Assist library. Private Members Only /  Coach Assist / Beaver Equipment Manuals / Vaild Service Manual.
Steve

Title: Re: Valid air System
Post by: Mitch Dashiell on November 24, 2018, 09:02:48 AM

Thanks, I have the manual and it does not show component lay out.  For example, front and back tank, aux tank, aux pump, location of check valves, how the air lines run between each component and to the air bags, etc.  That is what I am looking for.  More of an installation explanation and component layout.  The builders must have had something like that when the coaches were built.

Title: Re: Valid air System
Post by: Steve Huber Co-Admin on November 24, 2018, 03:15:01 PM

Mitch,
If a parts locater / routing diagram exists it would probably be at Monaco since installation locations are determined by the coach builder. If they don't have one you will probably have to trace the component and air line locations under the coach. At least the Service Manual shows what most of the components look like. The Installation and Troubleshooting Guide lists general locations of some components such as the level sensors. The valve manifold is up front if I remember correctly.
Steve