BAC Forum
General Boards => Technical Support => Topic started by: Jerry Emert on January 07, 2022, 07:15:53 PM
-
Short trip yesterday to get a new washer dryer. Noticed that we had a very noticeable lean to port (left for you land lubbers!) I got home and auto leveled, which worked fine, needs adjusting but no huge lean. I know there is a couple of ride height sensors on the rear axle and one on the front. I suspect the drivers side one on the rear but don't really know much about the greasy side of the motor home. I also know I probably wont do the work but would like enough of an idea about whats going on to not get taken to the cleaners. Any thoughts would be appreciated. Thanks
-
Jerry,
Assuming no air leaks or broken parts, the adjustment takes about 5 minutes once the coach is elevated or on a lift. Not sure of the exact airbag plate to plate spacing on your coach but it's probably between 9.5 and 10". If they match the right side spacing it should be fine.
Steve