BAC Forum
General Boards => Sources for Suppliers, Parts and Maintenance Materials => Topic started by: Tom Chace on November 04, 2017, 04:37:58 PM
-
Does anyone have a spare plastic adjuster which is on the adjuster mechanism on most older Beavers
The description is:
Black Plastic /Rubber At aprox 3" long
Mounts onto the metal rod behind the wheel that keeps the coach level near the air bag
I have attached a picture with this e-post
Thank You
Tom Chace
401-965-3259 cell
1999 Beaver Montrey
3126b CAT
-
Tom,
Beaver Coach Sales is probably your best bet. Be VERY careful when replacing it as the air bag can deflate quickly and the coach will drop, crushing anything in it's path. I would have this done at a qualified shop.
Steve
-
NAPA can get the boot in if your local outlet doesn't happen to have them in stock. Check that it's precisely the right one, though I don't know that there's multiple versions anyway. I ordered two so I have a spare.
Also, enter "ride height" or "boot" in the Forum's Search field (use the Search tab on the menu bar above, NOT the Search field at the upper right corner of this page) using my name and review previous discussions here before messing with the valve. Caution is advised under there.
https://www.napaonline.com/en/p/MBIRN10JC
Joel