BAC Forum
General Boards => Technical Support => Topic started by: Paul Bedoe on April 14, 2021, 07:17:07 PM
-
After the initial trip about 5000 miles i noticed quite a bit of porpoising. Just took a quick look under the coach looks like 10 air bags and 8 shocks ? My 4 shocks in front are Koni and the rear seems to have the original Bilsteins. 8 air bags look new and 2 look like I better change them before the next trip. Are all the shocks the same ? I would like to change the rear 4 shocks to Koni and at the same time replace the two air bags just have to make sure in get the right parts. Looks like the 6 rear air bags are the same ? .. I need to change the two just forward of the rear wheels
Thanks for the input ...
-
Was not able to get numbers off old shocks but I did discover 6 rear shocks and from the forum I need Koni 8805-1005SP1 since my bolts are 3/4 “
Now I just need the rear airbag number
-
Another forum gave me the tag axle air spring number
IR12 492
-
Just finished all 6 rear shocks and the two airbags .... not a tough job happy to do it at home with hd impacts
-
Paul
I missed this post entirely. Glad you got er done.
-
The coach came with 4 Koni up front and 8 new air bags mystery why they did not do 10.... so I found 6 Koni for the rear delivered for $180 each and the 2 air bags for $120 ( continental ) I was going to have my boys help but in for a penny in for a pound. I threw on the coveralls and changed the 6 shocks and 2 air bags .... tied up two hanging lines to the trans... changed a couple hose clamps.... hit the drive shaft with grease....needed two new air fittings on the bags and new nuts....and I found my air pressure regulator for the tag was bad so I changed it...
The ride is amazing better went on a 5 mile humpy test ride ... and filled it for $2.89 a gallon...
I can only guess what the labor would have been on the work above and I know the job was done to perfection and yes wish I was 20 years younger doing the heavy work 🤠
-
And FYI I have zero nada 0 faith in bilsteins on my last coach I snapped two shafts driving thru NY ... these Koni are at least double the shaft diameter also when I removed the bilsteins I grabbed the cylinder and pulled bending each bilstein when I did so