BAC Forum

General Boards => Technical Support => Topic started by: lance undhjem on May 29, 2021, 07:33:55 PM

Title: Auto Level rear leveling LEDs on steady
Post by: lance undhjem on May 29, 2021, 07:33:55 PM

I have a 2007 Beaver Contessa with the air leveling system (no jacks). All of the rear red LED lights are on steady. I can manually raise and lower the rear of the coach. The auto level system seems to work. The rear air system is fully functional. What causes these lights to illuminate steady???

Title: Re: Auto Level rear leveling LEDs on steady
Post by: Bryan Beamon on May 30, 2021, 03:46:24 PM

Lance, suggest you contact Valid air leveling system @ 888-632-6477. Their tech support is excellent. I can not remember how to reset your system but they will walk you through the process. Good luck

Title: Re: Auto Level rear leveling LEDs on steady
Post by: Steve Huber on May 30, 2021, 05:25:41 PM

Lance,
I've loaded the Air Only Operating Guide on Coach Assist in the  Leveling Systems section. We also have the Service Manual but after reading it, I agree with Bryan to call Power Gear for advice, especially if your Fault indicator is not illuminated.
Steve

Title: Re: Auto Level rear leveling LEDs on steady
Post by: lance undhjem on June 11, 2021, 06:23:27 PM

Thanks for the great suggestion. The Valid Manufacturing tech department was awesome! For future reference, all lights on (including the green light), without a fault light, and all leveling systems working normally points to a problem with the auto-level panel. The tech, Chris, tells me that because of the location of the panel (next to the window) the problem was most likely caused by water getting to the panel. They still make the panel and can overnight it to you for about $400. Thanks again for the great Forum help!!!!