BAC Forum
General Boards => Technical Support => Topic started by: Michael Kauffman on September 10, 2011, 03:18:42 AM
-
[size=14]I was working on the sewer odor problem, from an earlier post, and decided to run some water through the Bendix washer/dryer, to make sure the trap was filled. We've never used it, in the year and a half we've had it. I looked up the drain schematics, and it looks like the washer is suppose to drain directly out, without going through a tank. I ran at least a couple of gallons through it, and nothing came out the drain. Does it really go into the gray tank first? I am just full of questions today.
Thanks everybody.
Mike[/size]
-
Some Beavers require a sewer connection to use the washer, because they drain directly. Others, like mine, drain to the grey tank, and do not require a sewer connection. However after 2 loads, be prepared to dump the tank. My washer uses about 26 gallons of water per wash. Apparently yours goes to the tank.
Larry