BAC Forum

General Boards => Technical Support => Topic started by: Adam Hicklin on April 15, 2023, 03:22:02 PM

Title: Slide out seal
Post by: Adam Hicklin on April 15, 2023, 03:22:02 PM

Does anyone know how this black sweeper seal is attached?  It’s attached on the inside surface.  I can’t feel any mechanical connectors.  Is it glued? Fit in to a slot?  Any help would be appreciated.  It needs to be replaced.  Also, how is the white seal around the outside perimeter attached?  Seems to be glued, but I don’t want to start pulling on things until I know.  Last question…where can I purchase these seals? 

Title: Re: Slide out seal
Post by: Dan Johnson on April 15, 2023, 03:56:15 PM

Watching.  I need to address seals on my Beaver also. I hear Steele rubber products but they need to know the seal particulars.

Title: Re: Slide out seal
Post by: Fred Brooks on April 16, 2023, 03:09:02 PM

  Here is another source for RV seals https://www.cleanseal.com/

Title: Re: Slide out seal
Post by: Adam Hicklin on April 27, 2023, 03:41:51 AM

Fred, any idea how they attach?  Are the press attached with two sided tape? Fit in to a channel?   I’m afraid to pull on them. 

Title: Slide out seal
Post by: Steve Hutchins on April 28, 2023, 02:25:50 PM

I just replaced mine on the bedroom slide,  not the sweeper but the sides and bottom.  Fairly easy if it glues on like mine, here's where I bought mine:

https://www.rvupgradestore.com/shop-s/1180.htm?Search=slide+out+rubber+seals

You'll need to pull a bit on your seal to see how it is attached then find the correct replacement.

Steve