BAC RV Club Forum
General Boards => Technical Support => Topic started by: Paul Champagne on March 04, 2026, 11:43:02 PM
-
Seems my circuit board has lost power to activate the flush switch I noticed 2 wires red @ black were disconnected from the terminal block so i hooked them back up and now there is no power to the Board anybody know where the fuses are for the toilet as I checked in the rear closet and there are lavatory fuses but they were for the bathroom lights not the toilet?
I need to get this toilet working asap
Thanks for your help
06 Thunder Dometic toilet
-
Your floorplan is different than ours so the location might be different, but…look in the multi-plex enclosure located in the bedroom wardrobe. There should be a 12-volt domestic fuse panel containing 12 fuses (not the Intellitec multi-plex modules). The toilet fuse is F10 (10-amp).
-Scott