BAC Forum

General Boards => Technical Support => Topic started by: Jim Shaw on July 09, 2013, 02:07:50 AM

Title: main Slideout
Post by: Jim Shaw on July 09, 2013, 02:07:50 AM

I have noticed that when I put my front slide in it tends to walk just before it completely closes. It seems like one end is closing just a little before the other end. It does close completely though.

Jim Shaw
03 Monterey
2 slides

Title: Re: main Slideout
Post by: Roy Warren Co-Admin on July 09, 2013, 03:55:33 AM

It could be a damaged roller.  Mine had the same problem and there were some damaged rollers that apparently caused the problem.  Took out the rollers and replaced the hard rubber surrounding the roller with PVC pipe.  Had to press the pipe onto the roller then put it back into the slide.  Slide works great now.  Thanks to Roy Mueller for this idea.
Roy Warren