BAC Forum

General Boards => Technical Support => Topic started by: Keith Moffett Co-Admin on October 05, 2013, 11:35:16 AM

Title: Clearance Lights
Post by: Keith Moffett Co-Admin on October 05, 2013, 11:35:16 AM

Does anyone have a resource for clearance lights? (preferably LED)
My previous source doesnt have anything that measures 4 1/2 x 1 5/8 as our current ones do.
We need both amber and red.

Thanks
Keith

Title: Re: Clearance Lights
Post by: Stan Simpson on October 05, 2013, 02:04:29 PM

I found these on Ebay.

http://www.ebay.com/itm/Red-LED-4-Truck-Trailer-RV-Clearance-Marker-Lights-3-diode-Optronics-/290988151894?pt=Motors_RV_Trailer_Camper_Parts_Accessories&hash=item43c03ed456&vxp=mtr

Title: Re: Clearance Lights
Post by: George Harwell on October 05, 2013, 03:22:16 PM

Stan, AMAZON has the original Bargman lights for $3.98. It is the light assembly that has the bulb ,base and gasket. The part numbers are 34-17-808, and 809. Haven't found these in the LED model yet.

Title: Re: Clearance Lights
Post by: Jerry Carr on October 05, 2013, 03:44:11 PM

Stan I bet if you contacted Jim Nichols he would be able to help you he has been doing LED upgrades for many of our members.

Title: Re: Clearance Lights
Post by: Bill Brown on October 05, 2013, 04:45:22 PM

Jerry,

The following address should get your what you are looking for.

http://www.bargman.com/content/products.aspx?lvl=2&parentid=8400&catID=8420%20&part=0

Bill

Title: Re: Clearance Lights
Post by: Stan Simpson on October 05, 2013, 07:22:22 PM

Bill and Jerry,

I have already done my coach with upgrades from Bargman. I was posting in answer to Keith Moffett's inquiry

Here are Bargman's that plug in, and require no wiring. They are available in yellow and red.

http://www.bargman.com/content/products.aspx?lvl=3&parentid=8400&catID=8420&part=42-59-410

Stan

Title: Re: Clearance Lights
Post by: Karl Welhart on October 05, 2013, 10:33:44 PM

I would try Ryder Truck Parts On-line.  They have very good on-line prices for marker lights.

Title: Re: Clearance Lights
Post by: Dennis Crawford on October 06, 2013, 01:13:32 AM

Keith,

I just replaced mine with LEDs from NAPA.  perfect fit.

Dennis