BAC Forum
General Boards => General Discussion => Topic started by: Michael Marcocchio on September 19, 2014, 03:58:50 PM
-
Hello everyone could someone tell where I can get a Beaver plack ladder bracket. Thankyou
-
Is that for the yellow ladder you are going to hang on the back?
BAC Logo Plaques for Your Coach
Chuck Rendall: 818-360-8618
Email: c.rendall@earthlink.net
You can get the ladder brackets from FMCA. Check their monthly magazine for information.
-
Hello lol lol I would never hang a yellow or green ladder on my coach it is the plack brackets I am looking for Thanks Roy got the email.
-
Michael,
I think that Chuck has the brackets to attach the plaque to your ladder also. His complete contact information is on page two in Beaver Tales.
Gerald
-
If you are talking about the brackets for mounting an FMCA, Good Sam, or BAC or other "goose egg" on your ladder, the eggs and brackets and other related paraphanalia are made and sold by Kiley Mold Company, as promoted in club literature: http://www.kileymold.com/products.html
I have 4 plaques on my coach, only one of which is on the ladder. I made aluminum brackets for the other 3 and mounted them on the engine access door louvers in such a way that the brackets are unseen and the plaques don't really interfere with air flow through the compartment. I did that for two reasons; on the street side they are more visible to others on the highway, and they're never in the way when I use the ladder. If you'd like pix of the installation I can supply some. ;)
Joel
-
Joel,
I'd be interested in the pics.
Thx, Steve
-
OK, but you'll have to excuse that the coach has been sidelined for a very long time and needs a bath badly. I also note from taking these closeup pix that some of the nuts I used that were supposedly corrosion proof, mostly brass, have rust stains. Looks like maybe a steel washer snuck in somewhere.
Will have to stop working my rear off on the stick-built and pay more attention to the Beav I reckon!
Joel
-
Very nice thanks for sharing