BAC Forum

General Boards => Technical Support => Topic started by: Keith Moffett Co-Admin on February 28, 2017, 07:25:03 AM

Title: SCS Frigette coach step
Post by: Keith Moffett Co-Admin on February 28, 2017, 07:25:03 AM

Does anyone know where a new step assembly like this is available?  I understand Lippert owns it now and I have a recall kit but I must have scraped it on the crown of the road so it stopped working.  At this time it is stuck in the out position.  Any suggestions are appreciated.

Thanks

Title: Re: SCS Frigette coach step
Post by: Steve Huber on February 28, 2017, 01:36:51 PM

Keith,
This write-up might help. http://beaveramb.org/acadp_listings/entry-step-problems/
Suggest you disconnect the 4 way connector feeding the step and see if you can push step in manually and see where binding is occurring.
Steve

Title: Re: SCS Frigette coach step
Post by: Keith Moffett Co-Admin on March 02, 2017, 07:50:51 AM

Thanks Steve, will look into that in greater detail.
The results so far are good.  Got the controler dried out and the magnetic switches cleaned and working again. 
I also believe that the motor is getting weak so the dirt buildup was having a big effect too.  Straightened the lower step bracket but that will need welding soon.  Meanwhile the step is working thank God.