BAC Forum
General Boards => General Discussion => Topic started by: Bobby Kirk on July 08, 2017, 11:42:25 PM
-
I have a 2006 Marquis. The Drivers side slide locks are hitting coach and bending them over so they do not work. I have the lock off and have straightended the piece that was bent. Does anyone have a diagram how to thread the cables back on. Appreciate any help.
Bobby Kirk
-
Bobby, we are having problems with one of ours too. We are at BCS and they will be replacing it. I suggest a call to Larry in parts for the diagram by email to you.
-
Thanks Keith: Was trying to keep from replacing. Priced one from Alliance it was about 1200 if I remember. Will call tomorrow and see if i can get diagram. Thanks
Bobby Kirk
-
Probably not the same unit as mine are from a 03 but I had a cable break and when I had elite in Harrisburg look at it they removed the mechanism from both sides leaving the cover plates in place to not require a new paint job. After their opinion that they weren't really needed I followed their recomendation to just remove. After 3000 miles I can see no difference or slide movement while in motion ... Of course as I stated your later more "Monaco " coach may be different.
-
My slide locks were doing the same thing. I traveled all Summer last year without them on the Coach. My RV "guy" replaced them last winter. The extended warranty paid the lion's share of the 1500 apiece for them. I didn't notice any difference either but I figured that they were being paid for I might as well have them. Knowing what I know now I wouldn't replace them if I had to pay for them. I would use a 2X4 as has been suggested in other threads. Good luck.
Jerry