BAC Forum

General Boards => Technical Support => Topic started by: George A Rogers on August 18, 2017, 10:25:06 PM

Title: 2009 Beaver Contessa 425 cat No power BIRD ign. input
Post by: George A Rogers on August 18, 2017, 10:25:06 PM

I am installing Cat Prime Pump 206-5657.   All is going well except no switched power at BIRD ignition input. I can't find fuse. I would welcome ''help'' or info on how to come by 12 volt   120 volt   &   plumbing  schematics for my 09 Beaver Contessa.

Title: Re: 2009 Beaver Contessa 425 cat No power BIRD ign. input
Post by: Steve Huber on August 19, 2017, 12:45:49 AM

George,
The 08 schematics in coach assist may help as I doubt Monaco made any major changes between 08 and 09 http://beaveramb.org/coach-assist-members-only-2/
You can also call Monaco Tech support and request drawings (877-466-6226)
Be sure you are looking at the BIRD and not the Big Boy relay. The BIRD is a rectangular box (mounted on door of elec. access bay in rear of my coach). See picture. The wire you want (preferably) is #233. I tied into it before it reached the BIRD, see 2nd picture. It is in the bundle of wires that runs to the door the BIRD is mounted on and is not fused. (My installation has a 4th wire coming from the WAGO connector in the picture as I have it powering a tire monitor booster). Let me know if you need more help or call me at 480-201-3686.
Steve