BAC Forum

General Boards => Technical Support => Topic started by: rick Kirchner on November 22, 2018, 06:53:13 PM

Title: water distribution system re-build
Post by: rick Kirchner on November 22, 2018, 06:53:13 PM

many years ago there was a post on how to totally re-build the water distribution system behind the panel.  I've searched for a couple of hours now and can't find it - might have been on a Safari site....

It had a lot of pictures, and I think a lot of the plastic was replaced with copper if that jogs the memory.

does anyone have a link to that?

Title: Re: water distribution system re-build
Post by: Stan Simpson on November 22, 2018, 07:28:09 PM

Look up posts by Ed Buker...I think they may be a sticky as well.

Edit: I searched, and find that Ed is no longer a member, so his posts aren't available.

I did find this: http://beaveramb.org/forum/index.php/topic,7692.msg53600.html#msg53600

Title: Re: water distribution system re-build
Post by: rick Kirchner on November 23, 2018, 04:21:03 AM

people who are no longer members have their posts removed????

Title: Re: water distribution system re-build
Post by: Steve Huber on November 23, 2018, 05:16:33 AM

Their posts remain but the system removes their name/ID info and refers to them as "guest".
Steve

Title: Re: water distribution system re-build
Post by: rick Kirchner on November 23, 2018, 06:20:15 PM

well, searching for "water" or "manifold" by "guest" yields nothing unfortunately

Title: Re: water distribution system re-build
Post by: Darell T Hostland on November 24, 2018, 01:21:28 PM

Try searching for wet bay. There is a good write up and pictures here as well www.serenitysys.com and check out the Wet Bay Redesign & Rebuild on this site.

Title: Re: water distribution system re-build
Post by: Joel Ashley on November 25, 2018, 04:22:36 AM

How about this one, Rick:   http://beaveramb.org/forum/index.php/topic,462.msg2476.html#msg2476

Don’t use the “Search” feature at the upper right of this page.  Go to the “Search” tab that’s along the menu bar, following “Home” and “Help”.  Entering “water manifold” there will get some results that won’t appear using the other Search field.  And don’t enter Ed Buker or “guest” in the “by user” field or it won’t work;  leave that blank.  Some search functions are just too quircky I reckon, and aggravating.

Joel

Title: Re: water distribution system re-build
Post by: Dennis Belfils on November 25, 2018, 03:44:29 PM

In regards to rebuilding, where can I get new labels for the manifold?

Title: Re: water distribution system re-build
Post by: Bob Stone on November 25, 2018, 05:25:25 PM

Dennis,
If the labels in the attached photo meet your standards just send me your mailing address by PM or email and I’ll drop a set in the mail. The paper labels used by Monaco are an embarrassment to our quality Beaver coach to the extent that I bought a label maker specifically to correct this deficiency.


Any other Beaver owners wishing a set send me your address. Open to suggestions if anyone wishes them smaller or reworded. Free unless I get inundated.

Title: Re: water distribution system re-build
Post by: rick Kirchner on November 25, 2018, 08:10:14 PM

Thanks All - Darell - the Serenity one was the ticket.  I thought it was on this forum, and maybe ai just found an earlier link to it on the forum.  Thanks!

Yes, some forum search capabilities are better than others.  The one on my racing site is pretty good, and IRV2 uses a specific google application - probably overkill for here.

Title: Re: water distribution system re-build
Post by: Dennis Belfils on November 25, 2018, 10:18:45 PM

Thanx Bob. Those will do quite well. We are currently at POB 544 Blythe, CA 92226. Thankyou very much