It always has for me. I hit the re-set and when I go back in the coach and turn the key, the "wait to travel" light comes on the dash, and I can touch the "travel" on the touch pad, and it brings the coach to ride height. I do it while the coach is running.
The thing that causes me to use the re-set is this: I have air leveling only. Most of the time, I use the auto leveling. Sometimes in the process of leveling, one of these two things occurs. The front to back shows that either the front needs to go down or the rear needs to come up. For some reason, the light that tells me the front to back is out of level will not go off (not every time, just sometimes) even after Becky tells me the level she has on the kitchen counter/and then the bathroom counter shows us level. I hit the emergency shut off to stop the process. The touch pad will not work after I do that until I go out and hit the re-set button.
Coincidentally, I'm stopped near Moscow, Iowa and have an appointment with the HWH factory for Wednesday morning. I need them to tell my why the system is not working as it should. I'm too old to crawl around under the coach looking at ride height sensors, air bags, and the like.