Author Topic: Compartment door seperateing  (Read 191 times)

Bryan Beamon

  • BAC Member
  • *
  • Posts: 215
  • Thanked: 88 times
Compartment door seperateing
« on: August 03, 2020, 08:37:15 PM »
attached picture shows door seperateing and I was considering using JB Weld to reattach the panel. Any other reccommendations on the repair?
C & Bryan Beamon
2006  to present
2007 Contessa 42ft Cat C-9 400hp
1996 to 2006 97 Beaver Patriot Camden

Eric Maclean

  • BAC Member
  • *
  • Posts: 243
  • Thanked: 81 times
  • Karen and I would like to wish you all happy trail
Re: Compartment door seperateing
« Reply #1 on: August 03, 2020, 09:28:35 PM »
Bryan
There is a special panel bonding epoxy for the job if can be picked up at any automotive body supply house how ever it requires a special caulking gun to apply it and the panel joint has to be clean preferably to bear metal.
Eric
« Last Edit: August 03, 2020, 09:38:15 PM by Eric Maclean »
1997 Patriot Yorktown
3126-B
2009 Chevy HHR
Roadmaster falcon tow bar
Demco Air Force one tow brake.
The following users thanked this post: Bryan Beamon

Lee Welbanks

  • BAC Member
  • *
  • Posts: 1018
  • Thanked: 290 times
Re: Compartment door seperateing
« Reply #2 on: August 04, 2020, 02:44:28 AM »
Eric, Is that the two part 3M panel bond that takes the $50 gun to apply? This stuff will stick most anything together if applied correctly to a real clean surface.
Lee & Judy
Minnie the MiniDoodle
06 Beaver Patriot Thunder
Wilmington IV 40
525 Caterpuller
4000 Allison
Roadmaster Tow
2013 Honda CRV