Author Topic: Puck Lights  (Read 51897 times)

Mark Bodenhamer

  • Guest
Puck Lights
« on: October 03, 2020, 09:32:30 PM »
It's weird that the newest puck light thread is several years old.  I'm having a hard time finding LED replacements for the puck lights.  Either the hole is too large or they're way to expensive.  Have any of you replaced these in the recent past?  What with?  Black ones would be nice, just to update the look, gold is so 2000's.

I also tried several types of LED replacement bulbs all of them were too large to fit in the existing fixtures.  Open to suggestions.

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1676
  • Thanked: 497 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: Puck Lights
« Reply #1 on: October 03, 2020, 10:05:55 PM »
http://beaveramb.org/forum/index.php/topic,4328.msg32734.html#msg32734

Use the search argument "led light kaper" to find this post and others.

2004 Beaver Marquis Sapphire

I had a dream... then I lived it!

Mark Bodenhamer

  • Guest
Re: Puck Lights
« Reply #2 on: October 03, 2020, 10:40:07 PM »
That thread is five years old.  The links don't work.  Before I post anything I search the eff out of it.  Starting a new thread is the last resort, cuz who likes to type?  Got anything from this decade?

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1676
  • Thanked: 497 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: Puck Lights
« Reply #3 on: October 03, 2020, 10:49:58 PM »
Kaper II has a website with a catalog.  Look up what you want or look at the selection to see what fixture/s you might like.  You can call Leslie too.  She is very helpful.  Kaper products are also found on Amazon.
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!

Bill Lampkin

  • BAC Member
  • *
  • Posts: 1230
  • Thanked: 359 times
Re: Puck Lights
« Reply #4 on: October 03, 2020, 10:53:09 PM »
I think your lights are like mine; Gustafson 4015. I bought 4 this spring for a new light fixture I made. The trim ring on mine are chrome, but the base is the same no matter what trim ring you have. You may have to contact the mfg to find a source, as the link below says they are out of stock.


https://www.rvupgradestore.com/Gustafson-AM4015-10W-RV-Halogen-Light-Nickel-p/69-5181.htm

As for LEDs, I just popped out the chrome metal reflector, then most small G4 LEDs will fit. I have disc styles and tower style LEDs in a few fixtures. They work well.
2005 Patriot Thunder Lexington, 3 slides
40' tag axle (short wheelbase)
525 hp C13

"Goin where the weather suits my clothes..."

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3504
  • Thanked: 2689 times
Re: Puck Lights
« Reply #5 on: October 03, 2020, 11:11:02 PM »
Mark,
Contact Roy Boles (BAC member and Forum member). He has the LEDs. Attached are pics of them. I've used them in my last 2 RV and never had a problem. They either attach using the springs or you can use screws depending on the location.
Steve
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp

George Frudakis

  • BAC Member
  • *
  • Posts: 116
  • Thanked: 4 times
Re: Puck Lights
« Reply #6 on: October 04, 2020, 04:46:23 PM »
I purchased by light from Roy and they work well. Easy to install and fit the existing hole.
Good luck.
George
George Frudakis
2002 Marquis, Jasper
Ford F150 Platinum

Stan Simpson

  • BAC Member
  • *
  • Posts: 786
  • Thanked: 202 times
  • One mile South of the Cheddar Curtain
Re: Puck Lights
« Reply #7 on: October 04, 2020, 07:56:13 PM »
I have purchased all of my puck light replacements from Roy Boles. Easy peasy install (like Steve Huber said, you can use the springs or take them off and use the original screw holes) and never an issue with them.
Stan Simpson & Becky Glover & Moe the cat
2005 Monterey Laguna IV
C9 400 Cat
Honda CRV toad

Mark Bodenhamer

  • Guest
Re: Puck Lights
« Reply #8 on: October 05, 2020, 12:23:15 AM »
I sent an email to Roy.  It would be sweet if he still had some.  Thanks for the heads up.

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1676
  • Thanked: 497 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: Puck Lights
« Reply #9 on: October 05, 2020, 03:59:38 AM »
Yes... these are the LED ceiling lights referred to in my original post a few days ago.  They are from Kaper II in Kelso, WA.  When we changed our halogens to these 3 inch diameter LEDs a few years ago, the cost per unit was about $2.50, as I recall, because Kaper had over-ordered and had shelves full of too much inventory.  I purchased 75 of them because I needed 57 to replace all the halogens in our coach.  I gave the surplus to a Beaver-owner friend in Gresham, OR.  The only issue to be aware of is these are 12v and therefore are polarity sensitive.  If you connect the wires backwards, then the LED will not light up.  I used blade connectors so the wires were easy to swap if I put them on backwards.

The halogens were 10w.  These are 1.2w... much less energy taken from the batteries when dry camping... and give more light than did the halogens.
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!

Jeff Wheless

  • Guest
Re: Puck Lights
« Reply #10 on: October 05, 2020, 05:33:23 PM »
These have worked well in the halogen pucks without having to replace the entire assembly.     It is tough to find bulbs that fit AND have an appropriate lead length.    These fit the bill.   I had originally replaced my halogens with the disk style LED elements,but had issues with heat causing partial failure of some of the LEDs.   The below seem to work well ang use the reflective element of the puck fixture.

https://www.amazon.com/gp/product/B07PQJF9HZ/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
The following users thanked this post: Fred Brooks

Mark Bodenhamer

  • Guest
Re: Puck Lights
« Reply #11 on: October 09, 2020, 12:59:00 AM »
Kaper II just came out with a new one that isn't even on their website yet.  It's only spring mounted.  I ordered one just to see how it works.  Will post an update when I get it and see if it works for our needs.  Thanks for all the input.

George Frudakis

  • BAC Member
  • *
  • Posts: 116
  • Thanked: 4 times
Re: Puck Lights
« Reply #12 on: October 09, 2020, 07:12:48 PM »
Please keep in mind that in some of the existing holes the spring clips will not secure the pug light and you must screw alone with the clips. In some of the wood cabinets, the clips will not work must be screwed.
George Frudakis
2002 Marquis, Jasper
Ford F150 Platinum

Gene Obie

  • BAC Member
  • *
  • Posts: 140
  • Thanked: 33 times
Re: Puck Lights
« Reply #13 on: November 09, 2020, 06:27:22 AM »
I just replace about 50 of my puck lights bulbs with these. They are 3W and a little more expensive than some others but fit without removing the reflector.

https://www.amazon.com/gp/product/B08BJLX6RG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

-Gene
-Gene

2005 Beaver Marquis, Ruby 40, C-13 Cat 525HP, Allison 4k
Towing 2018 F-150
Washington

Mark Bodenhamer

  • Guest
Re: Puck Lights
« Reply #14 on: December 07, 2020, 01:58:53 AM »
Got new lights installed.  We love them.  It was a circus to get them and there's there's way to many people to thank individually. Thanks to all.