Hi everyone, I have a 2007 Beaver Contessa that I bought in February 2020. I live in Texas and did not have to winterize it last spring. The previous/only owner kept it in a heated building so probably never used the optional Electronic Automatic Winterization option, named Prevent-a-freeze. I went out this afternoon to determine how it worked and to be sure it worked. The problem is that there is no power to the Prevent-a-freeze control panel in the service bay. I got help to figure this out. We applied 12V power to the back of Prevent-a-freeze on each side of the switch, and the valve that selects water pump input from either (1) water from the fresh water tank, or (2) antifreeze from the Prevent-a-freeze antifreeze tank, works. All this to get to my question.
Does anyone know where the 12V fuse is that powers this system?
Thanks,
Reed