Hi guys just had a conversation with a member about water supply lines to his washer dryer which reminded me of an issue I had a couple of years ago with my own Splendid washer dryer.
In 2018 I first ran into a problem with my splendid WD802M washer that it would fill with water when shut off and leak out the front door.
It turned out to be a bad cold water fill valve ( the valve seat had dried out and would not seal)
I discovered that the cold water valve was hard to find for my older splendid unit so after some research I discovered a direct replacement for the original valve.
It turns out that a Samsung OEM part #DC62-30312J is a direct replacement.
https://www.amazon.ca/Samsung-Valve-Water-1245N-Dc62-30312J/dp/B001EY53MGhttps://www.speedyapplianceparts.com/samsung-dc62-30312j-washer-water-inlet-valve-replacement/Hope this helps someone
Eric
