« previous next »
Pages: 1 [2]   Go Down

Author Topic: ride height adjustment  (Read 3426 times)

Eric Maclean

  • BAC Member
  • *
  • Posts: 1202
  • Thanked: 446 times
  • Karen and I would like to wish you all happy trail
Re: ride height adjustment
« Reply #15 on: December 02, 2021, 02:55:20 PM »
 Mike
The earlier Magnum coaches used a different ride height control valve made by Halides.
They have two adjustments one the swing arm can be adjusted to Change the range of motion  is the longer the swing arm is adjusted out from the valve the more suspension travel can be handled.
And the second adjustment is the vertical rod length which is used to set the actual ride height
The adjustment that Richard made was the correct adjustment for this style of ride height valve.

https://www.finditparts.com/products/368746/haldex-kn27000?srcid=CHL01SCL010-Npla-Dmdt-Gusa-Svbr-Mmuu-K368746-L134&gclid=Cj0KCQiA-qGNBhD3ARIsAO_o7ymsu_HhlruGMycJ14idWS4CiXLX7phof_SsrUSc9TihZ2ZmGktm8icaAhH_EALw_wcB

Eric
Logged
1997 Patriot Yorktown
3126-B
2009 Chevy HHR
Roadmaster falcon tow bar
Demco Air Force one tow brake.
The following users thanked this post: Richard Good
Pages: 1 [2]   Go Up
« previous next »