Author Topic: Weep hole covers  (Read 2181 times)

Jill Goldman

  • Guest
Weep hole covers
« on: January 16, 2022, 12:19:56 AM »
Hi Folks,

Getting my 2003 Beaver Patriot ready to sell and I wanted to replace the 16 weep hole covers that are missing. BUT when I finally found the exact one it was listed as discontinued. Can I use any other one? The one I have is SE-GI - 3 11/16" in length.

Thanks,

Jill
« Last Edit: January 16, 2022, 12:31:13 AM by Jill Goldman »

Joel Ashley

  • BAC Member
  • *
  • Posts: 2341
  • Thanked: 801 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Re: Weep hole covers
« Reply #1 on: January 16, 2022, 06:03:02 AM »
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Mark Nagy

  • BAC Member
  • *
  • Posts: 7
Re: Weep hole covers
« Reply #2 on: January 14, 2024, 09:31:16 PM »
Hello All,
I know this post is 2 years old. but I just created a 3d print file for replacing this particular size weep hole cover which is 3-3/4" long and is not side specific (no left or right).  I believe these are used on the older model beavers. STL file attached.  If you don't have access to a 3d printer, let me know & maybe I can print it for you. :)
Mark Nagy
1996 38' Beaver Emerald Marquis
CAT 3176B dual Jake 365HP
2001 Jeep Wrangler

Andrew Clare

  • BAC Member
  • *
  • Posts: 1
Re: Weep hole covers
« Reply #3 on: January 23, 2024, 02:39:05 AM »
Here are my 3D printed covers for my 2002 Patriot:

« Last Edit: January 23, 2024, 02:45:34 AM by Andrew Clare »

Joel Ashley

  • BAC Member
  • *
  • Posts: 2341
  • Thanked: 801 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Re: Weep hole covers
« Reply #4 on: January 24, 2024, 03:58:39 AM »
Okay, apparently those aren’t links, like Mark’s prior post (stl URL), that most of us can open.
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat