« previous next »
Pages: [1]   Go Down

Author Topic: Hydro hot issue  (Read 4276 times)

Mark Hoovler

  • BAC Member
  • *
  • Posts: 27
Hydro hot issue
« on: September 01, 2024, 05:25:14 PM »
Hydro hot was not running well. 
I was performing the service and pulled the burner out and found the mounting bracket had a crack in it.  Now it is broken.  Is it better to rebuild the burner or is it recommended to replace the burner assembly?  Assuming the parts are still available. 
Thanks for any help

Mark
Logged
2006 Monterey Laguna IV
C9 400 hp
2020 F-150

Joel Ashley

  • BAC Member
  • *
  • Posts: 2455
  • Thanked: 771 times
  • OSU Class of '73, Oregon Native. RVing 40 years
Re: Hydro hot issue
« Reply #1 on: September 01, 2024, 09:56:40 PM »
Check on John Carillo’s site.  But a local machine shop may be able to repair the bracket or make a new one.

https://www.heatmyrv.com/product/bracket-control-unit-webasto-dbw-2010-300-wpx-362-107/

Joel
Logged
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Mark Hoovler

  • BAC Member
  • *
  • Posts: 27
Re: Hydro hot issue
« Reply #2 on: September 02, 2024, 03:15:52 PM »
Thanks Joel I think we found the parts on his sight

Mark
Logged
2006 Monterey Laguna IV
C9 400 hp
2020 F-150
Pages: [1]   Go Up
« previous next »