General Boards > Technical Support

Water Pump relays, switches, and wiring 99-2001 Marquis

<< < (2/2)

Eric Drickersen:
Thank you Fred! Your guidance has been super helpful in getting my marquis functional. I am using your schematic to trouble shoot my water system. As I had previously mentioned, the confusing part is that I there is a loss of 12v current somewhere between the breaker (located in the closet) and the relays. I am also getting a 10v reading on the ground bus. Based on our conversations, I have decided to start with replacing the two relays while also tracking down the cable run between the breaker and relays.

Navigation

[0] Message Index

[*] Previous page