General Boards > Technical Support
Vorad
Frank Bergamo:
I would just leave it. The cruise will operate if you turn it on/off/on/off/on. No Vorad but at least the cruise will work.
Scott Harbrecht:
I have used this company with excellent results. They light be able to repair the circuit board.
Frank Bergamo:
What is the company?
Michael Hammer:
Yes, could you post the company that did board repairs. Thanks.
Michael Wettstein:
We also have a 2008 Beaver Marquis with Vorad.
Our Vorad has been working intermittently and I have been having intermittent J1939 errors leading to Comm errors and sweeping gauges, loss of engine data on the Aladdin, Loss of TCM communication. It was traced to low resistance across the J1939 data bus pins in the Vorad.
Frank McElroy on the Monacoers forum helped me diagnose the J1939 errors/short. I sent my Vorad to him and he replaced a component on the board and also replaced the battery that depletes over time even though my battery was still within spec.
My Vorad works again.
To be clear, there was no reprogramming done to my Vorad. Vorad units that have had the battery die and lost the configuration in the RAM may still be inoperable because the tool the Rick Youngblood had to do the reprogramming is currently not working.
Navigation
[0] Message Index
[*] Previous page
Go to full version