General Boards > Technical Support

Dimmer switch for PacBrake?

(1/2) > >>

Brian Fahlgren:
I've searched the forum and didn't find anything. I want to mount an old-style foot dimmer switch on the floor so I can activate the PacBrake with either the factory rocker on the side console and/or a floor-mounted dimmer switch. Can I add a floor on/off dimmer switch by wiring it in parallel to the factory rocker switch?
I know PacBrake makes a floor-mounted switch, but it's a momentary switch. I don't want to keep my foot on the switch.

I think it would be easier to press the foot switch instead of hunting for the console-mounted rocker switch. My coach is old enough that it doesn't have the switches in the center of the steering wheel.  Thanks!

Brian

David Ciotti:
I put a little runner bumper on my jake brake switch so i can easily find it without looking too hard.

Brian Fahlgren:
That's a pretty good idea too. Thanks!

Eric Maclean Co-Admin:
Brian
I can't see any reason why you can't use an old style foot dimmer switch in place of the rocker switch up on me console.
Just be aware that that switch controls the exhaust for pack brake through the engine ECM and transmission TCM.
the ECM commands the pack brakes solenoid operation using criteria to control down shifts and maintain an optimal RPM for exhaust breaking.
ECM also controls the RPM and road speed at which the pack break drops out to avoid stalling the engine it stops.


Eric

Brian Fahlgren:
Thank you Eric. I plan on doing it this week. I'll let you know.

Brian

Navigation

[0] Message Index

[#] Next page

Go to full version