General Boards > Technical Support

12 VDC, Front Run Bay Electrical power Chassis-Dash Controls

<< < (2/3) > >>

Fred Brooks:
  Hey Vince,
  Thank you for joining the BAC forum. Your input was very thorough. We look forward to further discussion as we navigate these special Coaches from a by-gone area. Blessings, Fred

David Ciotti:
When my headlights did not work all I had to do was trace the wire in the outside run bay under the drivers seat to the connector, unplug it and reconnect it several times and the lights work for a couple of years.

Vince Toscano:
Hi David,
I assuming that you took apart the connector associated with the headlight circuit? What was the condition of the pins and sockets of that connector? I wished that I could have posted the pictures of what I had found on out couch. I can send pictures.
Thank you,
Vince

Vince Toscano:
Thank you, Fred. You are most gracious. Blessing to you.

David Ciotti:
Here are photos of the bay and the offending connectors.  The corrosion was caused by a leaky drivers window which REV RV Group repaired. Its hard to believe they are still working.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version