General Boards > General Discussion
Backing into site - Tips?
Joel Weiss:
Either I'm insensitive to the issue because my PT handles better than the truck I got my CDL with, or there is a difference between the Magnum "B" and "C" chassis. I honestly don't find the turning radius to be that bad and I have yet to have any issue backing it into a campsite.
When Dennis Hill from RV Driving School was giving my DW a lesson a couple of months ago, he commented that the coach probably had the 53 degree wheel cut that was common on MH's until the past few years when it increased a bit. He didn't indicate that it was any harder to work with than many others,
Joel Ashley:
Gerald's right. I remember somewhere before 2004 when we started looking for a new rig, major mfrs. like Country Coach and Monaco, and Freightliner coach users like Newmar and Tiffin, started bigtime touting 55 degree max wheel angle. Put that together with our shorter coach (36' 10"), and maneuverability is relatively easy. Seems like later there was talk of some rigs at 57 degrees.
Joel
Gerald Farris:
On some coaches you can adjust the steering stops to get a little shorter turning radius, however there is almost no room to turn the wheels any further than they already turn without the tires rubbing on the majority of coaches.
Gerald
LarryNCarolynShirk:
I think I remember the pre 2003 Beavers have a 37 degree cut. That was improved by Monaco. I usually use the "go around the block" method to U-turn.
Larry
Richard And Babs Ames:
We made one U Turn and it took all four lanes of a divided highway with our 1997 Patriot and barely had enough room. When we repositioned our front axle to allow clearance for larger tires one of the "service" people at Beaver suggested reducing the wheel cut instead of the axle move. Would take 6 football fields.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version