Author Topic: Belt routing  (Read 5197 times)

Jim Shaw

  • Guest
Belt routing
« on: December 27, 2011, 04:40:25 PM »
The belt on my ISC 350 is cracking and I would like to change it before it brakes. It looks like I can do this by pulling up the floor in the closet for access, but it is difficult to see how it is routed with the rear radiator.  Is there a diagram available that I could look at. I have a 2003 Monterey with the Cummins 350 engine. Has anyone changed the belt this way rather than removing the radiator and CAC?

Thanks Jim

Bill Sprague

  • Guest
Re: Belt routing
« Reply #1 on: December 28, 2011, 03:56:09 PM »
Jim,

I have the same engine but with a side radiator.  I should be able to take some pictures and email them to you.  My phone and email are in the BAC member directory.


Jim Shaw

  • Guest
Re: Belt routing
« Reply #2 on: December 28, 2011, 11:13:10 PM »
Thanks Bill but I am going to remove the CAC and I should be able to see everything. If not I will call you.
Jim