General Boards > General Discussion
Splendide fire
Roy Warren Co-Admin:
I have just had to replace our Splendide washer/dryer due to bearings on the drum breaking down. I talked to the repairman who did the replacement, under extended warranty, he told me the main thing in the new Model 2100XC with extra load, that I needed to annually remove the washer from the cabinet, take the back off and clean inside the machine the vent outlet. He said there was a turn where the lint gathered and that it needed to be cleaned. He also told me my outer vent would probably have far less lint now than previously.
By the way for anyone reading this if you have an older model, I removed from my original Model 2100, the control board and the soap drawer. The control board is extremely expensive and if you need or might need one, I will be happy to make arrangements to get it to you. Just let me know. I also have a motor for this model which is only 3 months old.
We use our washer on a daily basis and do not do extremely large loads and we dry for about 40 minutes then take everything out and use hangers or a drying line I made to stretch across the bedroom to finish drying. Works great!
Roy Warren
Navigation
[0] Message Index
[*] Previous page
Go to full version