Author Topic: Black/Grey Water release pulls  (Read 4544 times)

Dennis n Heather Crawford

  • Guest
Black/Grey Water release pulls
« on: June 23, 2013, 03:35:09 AM »
I have a 2003 Monterey. The open and closing of the grey and black water dump valves is by means of a pull (open) push(close) rod mechanism, one for each tank. I need to replace the actual handle which has a female thread which in turn attaches to the male open/closing mechanism. I am sure I am making a complete mess of describing what I need but hopefully someone will know what I mean. I would be grateful for any help.
Dennis.

Joel Ashley

  • BAC Member
  • *
  • Posts: 2360
  • Thanked: 807 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Re: Black/Grey Water release pulls
« Reply #1 on: June 23, 2013, 06:15:02 AM »
Go to the site below, Dennis, then select waste valves and accessories from the left hand panel's list.  Then scroll down to where there are Valterra and Bladex handles available.  Once you get a name and model of what you need, try searching for the best price, perhaps via the Amazon portal off the BAC main website;  they won't exactly break the bank though.
http://www.valterra.com/RV/rv-main.htm

Joel
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Bill Sprague

  • Guest
Re: Black/Grey Water release pulls
« Reply #2 on: June 23, 2013, 08:39:06 AM »
Long time ago, I broke my plastic handle.  I bought a metal drawer knob at Ace.  Then I drilled at tapped it.  Memory suggest it is 1/4 x 20.