General Boards > Sources for Suppliers, Parts and Maintenance Materials

Polished stainless plates dressing up bays

(1/1)

Richard Cooper:
I think the 2002 or beyond Marquis comes with extra chromed or polished stainless steel accents on the lower part of the bays.  It's quite nice and in looking at my own 01 Marquis I think it could accommodate them.  I have the indention there.  

Where does one get something like this and what does it cost?

Karl Welhart:
Richard,

That chromed stuff comes in rolls.  Measure the space you have and buy the size roll you need for your coach.  Cutting the stuff is a little tricky, especially the rear most piece.  I would measure each piece for each basement door, then take it to a machine shop that has a 5' (or bigger) metal shear.  Have them cut the ends for each length you need, then the rear most pieces will need to be cut lengthwise on a taper from front to rear.  Make sure you have enough total length to have at least one extra piece in case it is cut incorrectly.

Good luck,

Karl

Jim Skatzka:
Try this site.    http://www.rvstainless.com/
We've purchased some of their items in the past.  very high quality!

jim

Richard Cooper:
Great link.  But more costly than I want to lay out.  Thanks!

Navigation

[0] Message Index