General Boards > Sources for Suppliers, Parts and Maintenance Materials

Racor clear plastic fuel filter (R300200)

(1/3) > >>

Michael Rump:
All,

Does anyone know where to get these filters?  Have searched and googled to no avail, but do have a couple places to call on Monday.
Will update the supplier information when available.

Many thanks and Merry Christmas!

Steve Huber:
Mike,
Not sure if this is what you want but 300200 crosses to a NAPA Part Number: R59D10EV5. Wix also lists this filter when you drop the R and use 300200 as your lookup number.
Steve

Michael Rump:
Steve,

Those came up as a hydraulic filter element on the Wix web site.  I am looking for the part number for the plastic primary fuel filter with screen before the primary fuel filter.

Best regards,

Dave Atherton:
Michael Rump, looking over pictures I would suggest in removing your present setup and
Install Cat # 133-5671 filter with plastic bowel with drain along with Cat # 137-4367 filter
base.  Same time install update cat 238-0296 check valve which is the new replacement for
156-5783 check valve.  Would suggest in replacement of the Raycore filter assembly which pictures show with the Cat filter setup which primary filter is 10 micron. It is possible being a after-
market setup the black inside filter plastic bowel could be from o-ring or fuel hose feeding
Primary fuel filter from fuel tank. The Raycore filter setup is no longer made and looking at picture
Do not think problem is in fuel filter check valve but in your Raycore setup. I have had lots of
problem with that system sucking air. Note: location level of fuel than startup and note fuel
level at high idle. I do believe problem is located at present filter.
Dave Atherton Retired Cat Mechanic

Edward Buker:
Michael,

Is the unit in the center of this photo the unit you are referring to with the screen in the vertical plastic bowl?

Later Ed

Navigation

[0] Message Index

[#] Next page