General Boards > Redecorating and Updating your Motorhome

Day/Night shade removal

(1/2) > >>

Walter Parr:
How do I remove the shades, can't see any hardware visible and don't want to break things.
93 Grand Marquis

Neal E Weinmann:
The shades are held on very securely by clips screwed into the valance above. The little tang on the release tab as seen in the photo must be defeated to undo the shade. The clips are usually unaccessible installed and I usually resort to taking off the entire valance so I can get to the clips more comfortably and more easily. Good luck!

Leon Scroggins:
Just finished tightening up and replacing screws on some valances. Remove the four screws on the inside of the balance and the balance pulls away from the wall exposing the screws that hold the balance to the wall. The above clips are easily accesssble then.

Joel Ashley:
I agree.  Removing the valance is not tough and makes clip access much easier.

Joel

Walter Parr:
Thanks all
I'm taking it the window balance is the box / frame around the window? That is actually what I'm wanting to take off, I thought I had to take the shades off to get to the top screws, I see the little L brackets on the bottom, but couldn't see the ones for the top.

Navigation

[0] Message Index

[#] Next page

Go to full version