General Boards > Sources for Suppliers, Parts and Maintenance Materials
Interior Puck Lights
Jerry Emert:
One of my puck light sockets have gone bad. When I noticed the light out I tried to put a new LED light in it but the light flickers on and off as I move the bulb. I know, don't move the bulb! I tried that but the default position of the bulb in the socket is off. I've looked at all our links to parts and searched here but I cannot find the socket I have, Most seem to have 3 springs to hold the socket in the ceiling. Mine is attached with 3 screws. It is a 3 inch puck labeled on the back " Halogen Light, DC 12V 10Watt." Does anyone have a source? Trying to avoid shipping charges from Bend. Thanks in advance!!
Jerry
Paul Meehan:
Jerry, I used the springs in most applications but cut the springs off and used screws in three unit installs. Can you cut the springs off?
Jerry Emert:
--- Quote from: Paul Meehan on January 28, 2019, 10:31:19 PM ---Jerry, I used the springs in most applications but cut the springs off and used screws in three unit installs. Can you cut the springs off?
--- End quote ---
Paul, the one I took off does not have springs. It was screwed to the ceiling with 3 screws. So can I infer by your post that I can buy the ones with the springs and screw them to the ceiling? If not I need to find out where to buy the ones with the screw holes.
Thanks
Paul Meehan:
Thank is correct. Best of luck! :)
Jerry Emert:
Ebay had the proper light. Fit right in. Thanks for the suggestions.
Navigation
[0] Message Index
[#] Next page
Go to full version